 |
| 129,110 |
Annonces
inscrites |
| 550,000 |
Visiteurs
par mois |
|
|
 |
|
|
 |
maison à vendre |
 |
| $75,000.00 |
|
|
Recherches Populaires |
 |
| Information Annonce |
Visionnement d'une annonce |
|
 |
 Annonces Classées du Québec / Électronique / Audio / Autres
|
|
|
|
|
 |
|
|
|
|
Annonce #76409
24 juin 2008 |
|
1 Processeur 'EAW DX-810 'Processor''
Ce processeur 'EAW DX-810 'Processor'' est usagé et a été utilisé dans un club pendant seulement quelque mois. (presque neuf)
Super bon prix 1750$
Envoyez moi votre adresse email, je vous envoies les photos.
Contactez Valérie au 514.821.4257
DSP-based digital audio mixer and signal processor providing 8 balanced mic/line inputs and 10 balanced outputs. Mic preamps use XDR technology to offer studio-grade audio performance. The companion software provides access to the 3-band input EQ, 8-band parametric or 31-band graphic EQ for the outputs, compressors, gates, delays, and crossover configuration. The software also allows saving and recalling up to 24 presets, configuration for 32 control groups, for input force on/force off functions with priority, and for logic input and output connections.
This Processor was used 4 months in a club and the condition is very good.
Configuration 8 x 10 digital matrix mixer/signal processor
DSP Processing 32-bit DSP; 24-bit A/D - D/A
Inputs Balanced, Phoenix-type
Outputs Balanced, Phoenix-type
Control 2 RS-232C on DB9 (front/back)
Metering 12-segment LED; status LED
Additional I/O 10 logic inputs on DB25; 10 open-collector logic
outputs on DB25
Dimensions/Weight 2 RU - 3.5" x 19" x 13.25"; 12.9 lbs
SPECIFICATIONS
INPUTS / OUTPUTS
Inputs 1-8: Balanced, Phoenix-type connectors
Bus A and B: Balanced, Phoenix-type connectors,
Direct to Mix Buses
Outputs A-J: Balanced, Phoenix-type connectors
Record Outputs A/B: Unbalanced, RCA
Direct Outputs 1-8: Unbalanced on DB15
(bottom row is signal return)
Logic Inputs: 10 Inputs on DB25
Series resistance: 570 Ω
Internal pull-up: 47 kΩ to +5 VDC
Input voltage: +5.5 VDC maximum
Active voltage: +1.0 VDC maximum
Logic Outputs: 10 open-collector outputs on DB25
Series resistance: 550 Ω
Internal pull-up: 10 kΩ to +5 VDC
Active current: 10 mA maximum
Active voltage: +0.8 VDC max @ 1 mA
Serial Ports: 2 RS-232C on DB9 (COMM PORTS)
PANEL CONTROLS
Input Trim: 8 Rotary Potentiometers
Input Gain: 2 Pushbuttons per Input
Master Output Gain: 2 Pushbuttons per Output
Mode Select: 1 Pushbutton
Power: Rocker Switch
Phantom Power Select: 8 DIP Switches
PANEL INDICATORS
Input Levels: 12-segment LEDs per ch.
Mode Status: 3 LEDs; A/B/LOCK
Output Levels: 12-segment LEDs per ch.
Volume Setting: 12-segment LED Bar Graph
SIGNAL PROCESSING
General: Five 32-bit floating-point DSP
24-bit A/D and D/A converters
512Kx16 Flash ROM
128Kx32 SRAM (with battery backup)
Inputs: 3-band shelving EQ with parametric mid
Gain: ±15 dB
Corner Frequency: LO: 20 Hz-500 Hz variable
HI: 500 Hz-20 kHz variable
Center Frequency: MID: 20 Hz-20 kHz variable
BW: 0.1 octave to 6 octaves
Gate on each Input: Threshold: –60 dBfs to –1 dBfs
Hold: 0 ms to 2550 ms
Release: 10 ms to 2500 ms
Range: –100 dB to –1 dB
Outputs:
Delay on each Output: Temp: –40°F to 122°F (–40°C to 50°C)
Coarse: 0 ms to 200 ms
Fine: 0 μs to 997 μs
Crossover: Polarity: 0°, 180°
Filter Type: High-Pass, Low-Pass, Band-Pass
Alignment: Linkwitz-Riley, Butterworth
Filter Slope: 12 dB/octave, 18 dB/octave,
24 dB/octave (Butterworth only)
Frequency: 20 Hz-20 kHz
1/3-Octave Graphic EQ on each Output:
Gain: ±15 dB
ISO-Centered Frequencies: 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 60,
200, 250, 315, 400, 500, 630, 800, 1 k,
1.25 k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k,
6.3 k, 8 k, 10 k, 12.5 k, 16 k, 20 k
5-Band Parametric EQ on each Output:
Gain: ±15 dB
Center Frequency: 20 Hz-20 kHz variable
BW: 0.1 octave to 6 octaves
Compressor/Limiter on each Input and Output:
Threshold: –60.0 dB to –1.0 dB
Attack: 0.1 ms to 2500 ms
Release: 10 ms to 2500 ms
Ratio: 1:1 to 20:1
Output: 0 dB to +20.0 dB
AUDIO
Noise
(20 Hz-20 kHz bandwidth, Master Out, channel Trims @ unity gain, channel EQs flat, all odd
channels panned left, even channels panned right):Master level @ unity, channel levels @ unity:
–82 dBu
Single channel to Master Out: –100 dBu
(referenced to 1% THD+N)
Total Harmonic Distortion (THD+N)
(1 kHz @ +10 dBu {unity level} 20 Hz-20 kHz):
Mic in to Master Out: < 0.005%
Crosstalk
(1 kHz relative to 0 dBu, 20 Hz-20 kHz bandwidth, any line input to adjacent Direct Out,
Trim to unity): < –90 dB
Frequency Response
Mic input to any output: 20 Hz–20 kHz, ±0.5 dB
Equivalent Input Noise (EIN)
Mic in to Direct out, max gain,
150 ohm termination: –129.5 dBm unweighted
Common Mode Rejection (CMR)
Mic in to Direct out, max gain,
1 kHz signal: better than 80 dB
Maximum and Nominal Levels and Ranges
Mic inputs: +18 dBu, +4 dBu, 0 to +60 dB gain
Line inputs: +18 dBu, +4 dBu, –30 to +30 dB gain
Bus A/B inputs: +18 dBu, +4 dBu, –20 to +20 dB gain
All outputs: +18 dBu, +4 dBu
Impedances
Mic inputs: 1.3 K ohms
Line inputs: 40 K ohms
All other inputs: 10 K ohms or greater
All outputs: 120 ohms
PHYSICAL
Dimensions (HxWxD): 3.5”/2 RU x 19” x 13.25”
(89 mm x 483 mm x 337 mm_
Net Weight: 12.9 lbs. (5.9 kg)
ELECTRICAL
AC Power: 90–240 VAC, 50/60 Hz, 1.0 A
DC Power: 24 VDC, 3 A
Phantom Power: +48 VDC, current limited to 7 mA per input channel
Fuse Ratings: 1.6 A Slo Blo, 250 V
Contactez Valérie au 514.821.4257
|
|
|
|
|
 Information du vendeur |
Particulier |
|
|
|
|
|
|
 |
|
|
