 |
| 129,502 |
Annonces
inscrites |
| 550,000 |
Visiteurs
par mois |
|
|
 |
|
|
 |
***RARE*** TINY TEA CUP Mal... |
 |
| $2,495.00 |
|
|
Recherches Populaires |
 |
| Information Annonce |
Visionnement d'une annonce |
|
 |
 Annonces Classées du Québec / Électronique / Audio / Autres
|
|
|
|
|
 |
|
|
|
|
Annonce #76404
24 juin 2008 |
|
2 Subwoofers RCF ESW1018
Ces Subwoofers sont usagés et ont été utilisés dans un club pendant près d'un an.
Super bon prix 1150$ pour les 2!!!
Envoyez moi votre adresse email, je vous envoies les photos.
Contactez Valérie au 514.821.4257
The ESW 1018 is a professional bass reflex subwoofer that has been specifically designed for use with the EVENT series speakers.
The ESW 1018 subwoofer offers the following features:
1) Perfect definition down to 38 Hz.
2) Tuning frequency: 35 Hz
3) High efficiency (106 dB SPL in anechoic chamber half-volume).
3) Excellent ability to reproduce high power levels with low distortion up to 6000 W peak.
5) Compact dimensions for a passive speaker (250 liters volume).
The ESW 1018 incorporates a 350 mm (18") diameter woofer that can support 6000 W of peak power. Theexponential profile diaphragm is made of water-repellent cellulose pulp which provides a high damping factor. With a special RCF design, the configuration and physical characteristics of the spider guarantee excellent lowfrequency control and perfect linearity The 100 mm (4";) coil support is made of Kapton and assembled usinghigh temperature adhesives (resistant up to 300"C).
The incorporated passive crossover has been specifically designed to work with the EVENT 1000, 3000 and4000 speakers. The 12/6 dB/oct filter has a cut-off frequency; of 120 Hz, and can be by passed using a switchwhen an external crossover is used for creating a biamplification system. The cabinet is covered with blackmoquette, and has metal corner pieces to ensure protection against impact during transport and when thespeaker is situated on the floor. A special coupling situated over the covering on the upper part of the cabinet isused for fitting the EA 2 accessory, a metal support rod that can be used for installing the EVENT seriesspeakers above the ESW 1018 subwoofer to optimize the height of` the speaker from the floor.
Specifications
TYPE OF ENCLOSURE :subwoofer loaded in bass reflex
CONTINUOUS POWER :600 W RMS MUSICAL POWER 1200 W (RMS: .5 sec On, .5 sec Off)
PEAK POWER : 600 W (600 W RMS + crest factor 10 dB)
FREQUENCY RESPONSE : 35 - 150 Hz +/-3 dB
SENSITIVITY (IW/lm) 106 dB SPL in anechoic chamber half volume MAXIMUM SOUND PRESSURE 136.8 dB 1 m in anechoic chamber half volume (1200 W RMS)
IMPEDANCE 8 Ohm
CROSSOVER FREQUENCY 120Hz
TYPE OF FILTER 12/6 dB/oct
LOW FREQUENCY COMPONENT 1 woofer, 18"
TUNING FREQUENCY 35 Hz
ENCLOSURE MATERIAL Multi-layer wood
DIMENSIONS (BxHxL) 600 x 800 x 600 mm
COLOUR Black
NET WEIGHT 52 Kg
CONNECTORS 2 Neutrik Speakon Connectors
RMS CONTINUOUS POWER: The continuous power is measured by applying pink noise for 2 hours in the speaker operating range, filtered at the band extremes (50-5000 Hz)with a 12 dB/oct slope.
Contactez Valérie au 514.821.4257
|
|
|
|
|
 Information du vendeur |
Particulier |
|
|
|
|
|
|
 |
|
|
